Week 9: Duane

      In the previous week, the group extended the bridge that spanned a total of two feet to three feet.  The group kept the same design, and only modified the length.  The two foot design held 47.8 pounds, the same design, just a foot longer held only 28 pounds.  Not what the group was expecting to see.  However, I did notice that many other groups were observing the same results when testing their bridge.  So modifications were made.  The group tried to keep some details of the strong, original two foot bridge in the three foot design.  Some modifications include increasing both the height and width of the bridge.  While designing and testing the new bridge, major twisting was noticed and was at fault for the failure.  Once again, modifications were made to prevent the bridge from twisting.  While testing the newest design, there was very minor twisting noticed, and the bridge was failing because of weight and not twisting which was what the group was looking for.  One thing to keep in mind, while testing the bridge some of the pieces actually broke under the weight.  Pieces included the blue gusset plates.
      I have learned many things about bridge design.  Especially that it is a lot of "trial and error".  You are constantly testing designs and then making necessary modifications and then testing again.  There are many programs available to help in the design process as well.  A program such as West Point Bridge Design is very useful because it shows the tension and compression forces on each specific member of the bridge and can help to identify any weak parts of the bridge.  With calculations, the forces on a bridge can be computed.  This leads to the design of a much stronger bridge.  Finally, I also learned that when designing a bridge attention is not only focused on the strength, but also on the price.  This is very important to realize because the government or a company usually will have a budget for you to work within.